Filter
Top Products
29
Part 9 OPERATING YOUR DRYER
• Press MORE TIME or LESS
TIME until the desired drying
time is set.
Time change button is available only with Manual
Dry, Time Dry and Rack Dry programs.
Note
44
Time Change Button
1. Child Lock
Child Lock can be used to prevent
your children from changing options
on control panel while the dryer is
running.
When Child Lock is enabled, all the
buttons will be locked and
Child Lock glows.
To enable Child Lock, Press and hold OPTION for
3 seconds, A single beep tone is heard and Child
Lock is displayed on the status window.
To disable Child Lock, press and hold OPTION for
3 seconds again.
1
2
3
4
55
LED Display
66
Option Buttons
2. Wrinkle Care
This option helps to prevent wrinkles
in your laundry.
When you select the wrinkle free
option, the dryer will periodically
tumble for up to three hours after the
cycle has completed.
You can use this option in case you
can not remove laundry immediately
after drying is done.
3. Damp Dry Beep
When you select the damp dry beep option, a beep will
alert you when your load is approximately 80% dry.
This notice will allow you to remove lightweight items
that are dry or other items that you may wish to iron.
1. CHECK FILTER REMINDER
The display will show CHECK FILTER when the
dryer is turned on as a reminder to check the filter.
It turns off when the START/PAUSE button is pressed.
2. Estimated Time Remaining
The display shows the estimated time remaining.
In addition to this, if the dryer has some problem, it
displays error messages.
3. CYCLE COMPLETION INDICATOR
Shows how much of the current drying cycle has been
completed.
4. STATUS/CYCLE DISPLAY
This portion of the display shows the selected cycle,
operating status, and special messages. If a cycle has
special instructions, they will also be displayed in this
area.
WARNING!
• For better drying performance and safety, clean
lint filter every single use.
• Failure to follow these instructions can result in
death or fire.
!