LG Electronics DLE0442S Clothes Dryer User Manual


 
24
Manual Dry
Cycles Load Type
Temp.
High
Medium
High
Air Dry
Default Time*
(Minutes)
25
20
30
SPEED DRY
SMALL LOADS
FRESHEN UP
Remove Wrinkles
AIR DRY
Manual Preset Cycle Settings
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
6
Beeper
Use Time Dry Option to change
Drying Time on your own.
You can select the desired operation
time manually by pressing Time Dry
button which ranges from 20 to 60
minutes.
5
Time Dry
Part 9 OPERATING YOUR DRYER
Custom Programming Set up your
favorite combination
of settings and save them here for one-
touch recall.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
7
CUSTOM PROGRAM
Use Time Control Option to
select temperatures for the
Manual Cycles. Press TEMP.
CONTROL until the desired
temperature setting glows.
Temperature modifiers cannot
be used with the Sensor Dry
Cycles.
Type of Load Default Time*
(Minutes)
Foam rubber-pillows,
padded bras, stuffed toys
20 - 30
20 - 30
40 - 50
10 - 20
Plastic-Shower curtains,
tableclothes
Rubber-backed rugs
Olefin, polypropylene,
shear nylon
4
Temp Control
• Use this button to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how
much you want to dry the
load. As the cycle runs, the
control senses the dryness of
the load and adjusts the time
automatically based on the
selected dryness level.
3
Dry Level
DRY LEVEL selections can only be made while
using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically adjusts the
needed time which is already sensed.
Note