Filter
Top Products
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap(Remaining Hose).
Disconnect the wiring.
Three screws are unscrewed from the cabinet.
Remove the pump to arrow direction.
Loosen the nut.
Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Washing
Heater
Nut
Ring Terminal
PUMP
HEATER
THERMISTOR
CAUTION
35