LG Electronics 2P~32P Washer User Manual


 
19
ow to use washer
H
1. Normal
2. Rinse
+
& Rinse
++
3. Normal+Hold & Rinse++Hold
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse
+
- Rinse
++
- Normal+Hold
- Rinse
+
+Hold
Baby Care performs 4 Rinse
Cotton, Synthetic, Wool, Duvet performs 3
Rinses
Cotton Quick, Delicate, Hanwash, Quick 30
performs 2 Rinses.
• Used to additional rinse, which may assist in
removing traces of detergent residue.
• By selecting Rinse
+
or Rinse
++
function,
the Rinse Time and the Rinse water are
increased.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, select Drain on the program
dial or press the Spin button for the desired
speed, then press the Start/Pause button.
The matching indicator lamp will light up for
identification.
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously. (About three seconds)
When child lock is set, all buttons are
inoperable except for power button.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again.
(About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button to cancel the child lock.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
Change
the desired
program