Filter
Top Products
- 4 -
Important!
Should the care instructions for an article of clothing
not mention ironing, (Symbol ), you should not
iron that clothing article. You could otherwise cause
damage to the clothing article.
• Check the care instructions on the labels of the
clothing article whether and at which temperatu-
re the clothing article may be ironed.
• Set the appropriate temperature setting with the
temperature control
a
.
The control light for the temperature
w
lights up.
When the control light goes out, the chosen
temperature
w
has been reached.
• Wait until the temperature control light
w
goes
out.
• To moisten the material, press the button for the
water fog
o
.
This function is suitable for very dry, crumpled or
creased materials.
Steam Ironing
• Set the steam control
u
to the desired steam
strength setting.
Ironing with Steam Spray
The steam spray is especially suited to smoothing
places in the laundry that are difficult to access.
• Raise the steam iron a little way.
• Press the steam spray button to release the steam
spray
i
.
Setting the Steam Iron
Temporarily Aside
Fire Hazard!
Never leave the steam iron unattended when it is
hot or switched on.
• Set the temperature control
a
to the position
"MIN“.
• Only put the steam iron down on its standing
foot
e
, fig. 2.
Putting the Steam Iron Away
After Use
• Remove the power plug from the power socket.
• Empty the water reservoir and clean the gliding
sole
r
.
• Place the cool steam iron horizontally on a soft,
clean base.
Drip-Stop Function
In conventional steam irons, it is possible that at too
low ironing temperature water begins to trickle from
the gilding sole
r
. However, this iron possesses a
new technical feature, namely the DRIP-STOP func-
tion, to switch off steam. The iron automatically swit-
ches off the steam ejection at low temperatures. A
“CLICK” noise is heard when this happens.
Using the temperature rotary controller
a
, set the
required temperature.
Steam generation will continue as soon as this
temperature level is reached.
IB_KH1281_E4901_LB6 26.05.2008 13:52 Uhr Seite 4