Filter
Top Products
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial IN. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed IN (off position) when you change the setting.
Select Cycle
To select a cycle, push the control dial IN and turn it to
the right (clockwise) until the pointer is at the soil level
needed for the wash load.
Regular Cycle
Regular Cycle is used for normal, sturdy fabrics and
uses the following settings:
PREWASH (select models): approximately 16
minutes of wash time.
EXTRA HEAVY: approximately 13 minutes of wash
time.
HEAVY: approximately 11 minutes of wash time.
NORMAL: approximately 8 minutes of wash time.
LIGHT: approximately 6 minutes of wash time.
See Laundering Tips for proper washing procedures,
stain removal, and special laundering situations.
9
Using the Controls – Speed Select Models
STEP 5
STEP 6
Wrinkle Free Fabrics/Delicates Cycles
Wrinkle Free Fabrics/Delicates Cycles share the same
portion of the control dial. For wrinkle free fabrics,
select the cycle and turn the Wash/Spin Speed dial to
Wrinkle Free. For delicate loads, select Delicate
Wash/Spin Speed.
PREWASH (select models): approximately 14
minutes of wash time.
HEAVY: approximately 13 minutes of wash time.
NORMAL: approximately 12 minutes of wash time.
LIGHT: approximately 9 minutes of wash time.
HANDWASH (select models): approximately 6
minutes of wash time. Set the Wash/Spin Speed dial
to Handwash.
Note
• Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.