Filter
Top Products
9
Operating Your Dryer
Starting your dryer (cont.)
6. Push the Start Button. Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control Knob
to Off.
NOTE: The Cycle Control Knob should point to an
Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start Button.
NOTE: Your dryer stops automatically when a
cycle ends.
The following pages describe the drying cycles
on your dryer. The descriptions include suggested
temperature settings and drying times for various
loads.
Cycle and temperature tips
• Models KEYS777E and KGYS777E have a special
Ultra Low temperature setting that reduces drying
temperatures, providing enhanced fabric care for
delicates and other fine fabrics.
• In both Automatic cycles (Regular/Heavy and
Permanent Press), the FLO-THRU™ Drying
System automatically reduces the heat near
the end of the cycles to prevent overdrying.
• If some types of loads in the cycle descriptions
have more than one suggested temperature
setting, choose the lowest setting available on
your dryer.
• The last few minutes of all cycles are without heat
to make the load cooler to handle.
Selecting the right cycle and temperature setting
Drying tips
• Make sure you have selected the correct cycle
and temperature for your load. For example, use
the Towels feature for best drying results with
extra heavy items.
• Always follow care label directions when they are
available.
• Always use fabric softener sheets labeled as
dryer safe and follow package instructions
carefully.
• Remove the load from the dryer as soon as
tumbling stops to reduce wrinkling. This is
especially important for permanent press, knits,
and synthetic fabrics.