Filter
Top Products
DRYER USE
/
/
AUTO DRY
_IATtISWETO CYCLES 14
DAr_I>O O MORE NORMAL
[oo[ DO,VNo o
0 LESS
cm _EsD_¥O @ JEANS "_
WIINKL_(iu_ o
AUTO DRY
CHE_IINSC 0 LEVEL
PRESS&H01D3 BULKY / BEDDIN
C0r_lR0[LOCKDO s CONDS[0 LOCK/
UN£OCKC,ONTRq
DELICATE
CASUAL _ MANUAL ES]IM#_D
=_ CYCLES B_F REr_9_<U
IMED DRY
START EXPRESS DRY _! E TME
H E_3JY DUlY
OPTIONS MODIFIERS
O HIGH
O MEDIUM HiGH
O MEDIUM
O LOW
DAMP DRY SIGNAL
(ALIIOCY( SONIY] _ EXTRA LOW
• AIR DRY
WRINKLE GUARD TEMPERATURE
(CA UA_C_CtSO_L_)
\
• HIGH
e LOW
@ OFF
END of CYCLE SIGNAL
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
fiammabme on it (even after washing).
Failure to follow these instructions can resuJt in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information,
1. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2. Place laundry in dryer and shut door. See "Loading."
3. Press the selected cycle pad, The preset settings for Auto Dry
Cycles or Manual Cycles will glow, The estimated or actual
cycle time (in minutes) will show in the display.
To use an Auto Dry Cycle
• Select an Auto Dry Cycle.
• Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
• Select the desired Options.
Fire Hazard
No washer can compmetemy remove oil.
Do not dry anything that has ever had any type of oH on
it (including cooking oils).
Items containing foam, rubber, or pBastic must be dried
on a cmothesHne or by using an Air Cycle.
Failure to follow these instructions can resumt in death
or fire.
To make changes during an Auto Dry Cycle:
• Press PAUSE/CANCEL
Adjust Auto Dry Level and/or Options.
NOTE: Auto Dry Level selections can be made only while
using Auto Dry Cycles. You can select a different dryness
level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less
automatically adjusts the sensed time needed.
• MORE
O
O LESS
AUTODRY
LEVEL
PRESS& HOLD3
SECONDS[O LOCK[
UNLOCK CONTROL
13