Kenmore 9091* Washer User Manual


 
Oven Control Functions
READ TH EiNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN For satisfactory use of your oven become familiar with
the various pad functions of the oven as described below
BROIL PAD-- Used to UP and DOWN ARROW PADS-- Used along
select the variable broil with the function pads to select oven FEATUREINDICATOR
function temperature time of day clean time and LIGHTS-- These light to
CLOCK SET \ minutetimer show which feature is in
PAD-- Used _ _ use
to set the \
time of day. I
TIMERON/OFF "_ 0 _/ BAKEPAD--Usedto
PADUsedtoset .... J seectthebakefuncton
or cancel the minute .............. _ .....
timer The minute
timer does not start
or stop cooking
Also
TIMER ON/OFF pad
is used to set the
Continuous Sake
feature.
SELECT SELFCLEAN
PAD-- Used to select the
Self Cleaning cycle A 2
3 or 4 hour Self Clean
time may be selected
Se/li 3<a_< i
OVEN PREHEAT & DOOR LOCKED LIGHTS*-- The OVEN light
will glow each time the oven turns on to maintain the set oven
temperature The PREHEAT light will glow when the oven is first
set to operate or if the desired temperature is reset higher than the
actual oven temperature The DOOR LOCKED light will flash
when the oven door locks and unlocks or when using the Self
Clean cycle or the oven door lockout is activated The indicator light
will glow constantly after the door locks
CLEAR/OFF PAD-- Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate Oven Lockout
setting.
*Note: The OVEN indicator light on the electronic display wi!l turn ON and OFF:when using the Bake feature and during
preheat. This is norma I and indicates that the oven is cYcling to maintain the selected baking temperature, When the
preheat indicator light turns OFF, your oven is ready.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press B_o_.... appears in the display.
2. Press and hold the J%. until "Hr' appears in the display.
3. Press and hold B,o,until °F or °C appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10