Filter
Top Products
Operating Instructions
Operating Your Dryer
To reduce the risk of fire, electric shock or injury to
i
persons, read the IMPORTANT SAFETY INSTRUCTIONS
in this Use and Care Guide before operating your dryer.
2
3
Prepare load for drying.
• Dry items of similar fabric, weight and construction in
the same load.
• Separate dark items from light-colored items. Sepa-
rate items that shed lint from those that attract lint.
• Check for stains which may not have been removed
in washing. Repeat stain removal process and wash
again before drying. Dryer heat may permanently
set some stains.
• Place delicate or small
items in a mesh bag.
• Be sure buckles, but-
tons and trim are heat-
proof and won't dam-
age the drum finish.
Close zippers, button
buttons, fasten hooks
and Velcro®-Iike fasteners. Tie strings and sashes to
(Mesh bag not included.)
prevent snagging and tangling.
Check that the lint filter
is clean and in place.
Load the dryer and
close the door.
• Load items loosely. The
average wet load will fill
the drum 1/3 to 1/2 full.
Items need room to tumble freely for even drying
and less wrinkling.
• If desired, place a dryer fabric softener sheet on top
of the load at the beginning of the cycle.
• To save energy and time and avoid uneven drying
and wrinkling, do not overload the dryer.
• When drying large items, dry only two or three items
at a time. Fill out the load with small and medium
sized items.
• For delicate or very small loads, add two or three
similar items to improve tumbling action.
4 Select the appropriate cycle and settings for
each load.
NOTE
Over-drying can cause wrinkles, shrinkage, lint, harshness
and build upa of static electricity.
• Press the POWER button turn on the unit.
• Scroll in either direction to select the cycle desired.
• The estimated cycle time, suitable drying temperature,
dryness level and the number of options will auto-
matically be indicated for the cycle selected. See the
Dryer Settings Chart for more details.
• To change the settings, press the Temperature or Dry
Level buttons to enter the cycle settings screen. Make
your desired adjustments and press the Back button.
• To change options, press the Options button to enter
the options screen. A check mark will indicate each
option has been selected. To deselect an option, sim-
ply press a checked option and the check mark will
be removed.
.....................................................................................................................................................................................................................................................................................................................................................................................................................................................ii
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a setting
or option is not available for the cycle selected, the
indicator will not light.
5 Start the cycle.
• Close the door and press _ START. The dryer will not
operate with the door open. A pop-up window will be
displayed as a reminder to close the door.
• To change the cycle once the cycle has begun, press
POWER to cancel the current cycle, press POWER to
turn on unit again, select a new cycle, and press
START again.
• To add or remove items when the dryer is running,
open the door. The dryer will stop when the door is
opened. Allow the drum to come to a complete stop
before reaching inside.
• Close the door and press _ START to resume the cycle.
• A signal will sound at the end of the cycle if the
Chime preference is activated.
6 When the cycle ends, remove items immedi-
ately and hang or fold.
Clean the lint filter after every load.
14