10
Operating Instructions
continued
Anti Drip System
The Kambrook SpeedSteam Iron is
equipped with an Anti-Drip System.
The iron will automatically close the
steam valve when the soleplate
temperature is too low to produce
steam. When this happens you will
hear a click sound. It is safe and will
not harm the performance of the iron.
This is the reason the Fine Mist Spray
should be used when ironing delicate
fabrics at low temperatures.
The steam valve will open once
the soleplate has reached the
temperature required to create
steam.
After Each Use
Set the steam selector to the MIN
position and turn the Temperature
Control to MIN.
Switch the power off at the power
outlet and disconnect the power cord
from the power outlet.
Open the Water Tank Inlet and (over a
sink or bucket) invert the iron to empty
the remaining water from the tank.
Stand the iron in an upright position
and allow to cool.
KI400_KI460KM IB v1.indd 10 23/12/09 10:43 AM