John Lewis JLWM 1410 Washer User Manual


 
First use
Ensure that the electrical and
water connections comply with
the installation instructions.
Remove the polystyrene block and
any material from the drum.
Before the first wash, run a cotton
cycle at the highest temperature
without any laundry in the
machine, to remove any
manufacturing residue from the
drum and tub. Pour 1/2 a measure
of detergent into the main wash
compartment and start the
machine.
Personalisation
Acoustic signals
The machine is provided with an acoustic
device, which sounds in the following cases:
at the end of a washing cycle
•if there is a fault
You can deactivate the acoustic signal
(except if there is a fault) by pressing the
buttons 7 and the 8 simultaneously for
about 5 seconds. By pressing these buttons
again the acoustic signal is reactivated.
Child lock
This function works in two different ways:
If enabled before the «Start/Pause»
button is pressed, it prevents the machine
from being started.
If enabled after pressing the «Start/
Pause» button, it prevents any changes
being made to the programmes or
options selected
To enable or disable this function, press the
buttons 5 and 6 simultaneously for
approximately 6 seconds until the icon
appears on or disappears from the display.
13