John Lewis JLWM1402 1400 Washer User Manual


 
4
Your New Washing Machine
Your new washing machine meets all modern requirements for effective treatment of laundry with
low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
The programme progress display shows the programme steps selected, the programme phase which is
running and the end of the programme.
The programme selector dial combines the function of programme and temperature selection, making it
easier to set the programme.
Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces
thermal shock to fabrics, helping to prevent creasing.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
The balance control device ensures that the washing machine remains stable when spinning.
The ECO valve allows total use of detergent and reduces water consumption so saving energy.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The machine works more economically if it is fully
loaded.
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
In the interest
of the environment
Materials marked with the symbol are
recyclable.
Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute
the wash load manually and select a spin programme. For more detailed information see the section headed
“Something Not Working”.