Filter
Top Products
20 AC-Series Operator’s Manual-E/F
INSTALLING NOZZLE
CAUTION: To avoid injury from escaping uids
under pressure, relieve the pressure in the
system by stopping the washer and depressing
gun trigger. Lock trigger before changing or
adjusting nozzle.
Be sure nozzle is tightly attached before operating
to help prevent nozzle release.
1. Retract locking ring (A) of quick-connect tting and
insert male quick-connect tting of nozzle (B).
2. Push ring forward and lock nozzle in place. Be sure
nozzle is fastened to wand.
FINAL CHECKLIST
1. Check engine oil and fuel.
2. Check water pump oil level.
3. Open water supply completely.
4. Check all hose connections.
5. Check hoses for kinks.
PIC81•102299R0
Preparing the Washer
A
B