Filter
Top Products
7
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).
To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by
continuously rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than
the set frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
C
Option
Effect Comments
Enabled with
programmes:
Bleaching
Bleaching cycle
designed to
remove the
toughest stains.
Please remember to pour the bleach into extra compartment 4
(se
e page 56 )
.
2, 3, 4, 5, 6,
7, 8
Rinse cycles.
Extra Rinse
Increases the
efficiency of the
rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
1, 2, 3, 4, 5,
6, 7, 8 and
Rinse cycles.
Reduces the
spin speed.
All
programmes
except for 11
and draining.
Anti-crease
Reduces fabric
creasing,
making ironing
easier.
Setting this function will interrupt programmes 6, 7, 8, 10, 11,
Delicate Rinse with a laundry soak (Anti-crease) and the Rinse
phase indicator light will blink.
To complete the cycle, press the Anti-crease button.
6, 7, 8, 10,
11, Delicate
Rinse.