Filter
Top Products
AUS
7
Wash cycles and options
Wash options
The option optimises washing to suit the quantity of
laundry loaded into the machine, thereby reducing the overall
wash cycle duration while minimising water and energy
consumption. Press the
button to select the type of
wash cycle desired:
Intense: vigorous wash cycle for garments with a heavy soil
level.
Perform: standard wash cycle for garments with a normal soil
level.
Fast: quick wash cycle for garments with a light soil level.
! This may only be used in conjunction with wash cycles 1, 2,
3, 4, 5 (all three levels) and 6, 7, 8 (Perform and Fast levels).
Extra Rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 8, , .
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of
the drum, while the EASY IRON and START/PAUSE indicator
lights will flash (blue and orange respectively). To end the cycle,
press the START/PAUSE button or the EASY IRON button. For
wash cycles number 10-12, the machine will end the cycle
while the laundry is soaking; the EASY IRON and START/
PAUSE indicator lights will flash. To drain the water so that
the laundry may be removed, press the START/PAUSE
button or the EASY IRON button.
! It cannot be used in conjunction with wash cycles 8, 9,
13,
, .
Intensive Wash
This function is particularly
useful for the removal of
stubborn stains. Insert extra
compartment 4 (supplied
with the appliance) into
compartment 1. When
pouring in the bleach, be
careful not to exceed the
“max” level marked on the
central pivot (see figure). To
bleach laundry with no other
washing action, pour the bleach into extra compartment
4, select the “Rinse” cycle
and activate the “Intensive
Wash” option
. To bleach during a wash cycle, pour in
the detergent and any fabric softener you wish to use,
select the desired wash cycle and enable the “Intensive
Wash”
option. The use of extra compartment 4
excludes the pre-wash function.
! It cannot be used in conjunction with wash cycles 1, 6, 8,
9, 10, 11, 12, 13,
, .
Table of programmes and wash cycles
4
2
3
1
4
2
1
3
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load
(kg)
Cycle
duration
Prewash Main wash Bleach
Fabric
softener
Smart cycles
1
White prewash: extremely soiled whites. 90° 1400
-
8,5
2
White Cotton: extremely soiled whites. 90° 1400 -
8,5
2
White Cotton: heavily soiled whites and resistant colours. 60° 1400 -
8,5
2
White Cotton: lightly soiled whites and delicate colours. 40° 1400 -
8,5
3
Cotton (1): normally soiled whites and resistant colours. 60° 1400 -
8,5
4
Coloured Cotton: lightly soiled whites and delicate colours. 40° 1400 -
8,5
5
Synthetics: heavily soiled resistant colours. 60° 800 -
3,5
6 Jeans
40° 800 -
-
4
7 Shirts
40° 600 -
2
8
MixCool 30’: to refresh lightly soiled garments quickly (not sui-
table for wool, silk and clothes which require washing by hand).
Cold
water
800 -
-
3
Special cycles
9
Wool: for wool, cashmere, etc. 40° 600 -
-
2
10
Silk: for garments in silk and viscose, lingerie. 30° 0 -
-
2
11 Duvet
30° 1000 -
-
3
12 Outwear
30° 400 -
- - 2,5
13 Sport Shoes
30° 600 -
-
Max.
2 pairs
Partials cycles
Rinse - 1400 - -
8,5
Spin - 1400 - - - - 8,5
Drain - 0 - - - - 8,5
The duration of the wash cycles can be checked on the display.
For all Test Institutes:
1) Test wash cycle in compliance with regulation AS/NZS 2040.2: set wash Program Cotton, with a temperature of 60°C at 1400 rpm and using a load of 8 kg.