Filter
Top Products
7
GB
Wash cycles and
options
Wash options
The option optimises washing to suit the quantity of
laundry loaded into the machine, thereby reducing the overall
wash cycle duration while minimising water and energy
consumption. Press the
button to select the type of
wash cycle desired:
Intensive: vigorous wash cycle for garments with a heavy soil level.
4 You: standard wash cycle for garments with a normal soil level.
Fast: quick wash cycle for garments with a light soil level.
This may only be used in conjunction with wash cycles 1, 2, 3, 4, 5
(all three levels) and 6, 7 (4 You and Fast levels).
Easy iron
By selecting this function, the wash and spin cycles will be modified
in order to reduce the formation of creases. At the end of the cycle
the washer-dryer will perform slow rotations of the drum, while the
EASY IRON and START/PAUSE indicator lights will flash (blue and
orange respectively). To end the cycle, press the START/PAUSE
button or the EASY IRON button. For wash cycles number 9-10,
the machine will end the cycle while the laundry is soaking; the EASY
IRON and START/PAUSE indicator lights will flash. To drain the
water so that the laundry may be removed, press the START/
PAUSE button or the EASY IRON button.
It cannot be used in conjunction with wash cycles 8, 11, 12, 13,
, .
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level A1 (Iron dry).
Stain removal
This function is particularly useful
for the removal of stubborn
stains. Insert extra
compartment 4 (supplied with
the appliance) into compartment
1. When pouring in the bleach,
be careful not to exceed the
max level marked on the
central pivot (see figure). To
bleach laundry with no other
washing action, pour the bleach
into extra compartment 4, select the Rinse cycle
and
activate the Stain removal option . To bleach during a wash
cycle, pour in the detergent and any fabric softener you wish to
use, select the desired wash cycle and enable the Stain
removal option. The use of extra compartment 4 excludes
the pre-wash function.
It cannot be used in conjunction with wash cycles 1, 6, 8, 9, 10,
11, 12, 13,
, .
Delayed start
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text "OFF"
appears on the display.
This option can be used in conjunction with all cycles.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: select wash cycle 2 with a temperature of 60°C.
2) Long wash cycle for cottons: select wash cycle 2 with a temperature of 40.
3) Short wash cycle for cottons: select wash cycle 4 with a temperature of 40.
Table of programmes and wash cycles
4
2
3
1
4
2
1
3
Detergents
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Pre-
wash
Main wash
Bleach
Fabric
softener
Max.
load
(kg)
Cycle
duration
Smart cycles
.
1
Cottons with Pre-wash
: extremely
soiled whites.
90°
1200
•
•
•
-
•
7
2
White Cottons
: extremely soiled
whites.
90°
1200
•
-
•
•
•
7
2
White Cottons (1)
: heavily soiled
whites and resistant colours.
60°
1200
•
-
•
•
•
7
2
White Cottons (2)
: heavily soiled
whites and delicate colours.
40°
1200
•
-
•
•
•
7
3
Cottons
: heavily soiled whites and
resistant colours.
60°
1200
•
-
•
•
•
7
4
Coloured Cottons(3)
: lightly soiled
whites and delicate colours.
40°
1200
•
-
•
•
•
7
5
Synthetics
: heavily soiled resistant
colours.
60°
800
•
-
•
•
•
3
6 Jeans
40°
800
•
-
•
-
•
3,5
7 Shirts
40°
600
•
-
•
•
•
2
Special cycles
8 Wool
: for wool, cashmere, etc.
40°
800
•
-
•
-
•
1,5
9
Silk/Curtains
: for garments in silk
and viscose, lingerie.
30°
0 - -
•
-
•
1
10 Outwear
30°
400 - -
•
- - 2
Partial cycles
11 Drying Cottons
- -
•
- - - - 5
12 Drying Synthetics
- -
•
- - - - 3
13 Drying Wool
- -
•
- - - - 1,5
Partial cycles
Rinse
- 1200
•
- -
•
•
7
Spin
- 1200
•
- - - - 7
Drain
- 0 - - - - - 7
Wash
cycles
The duration of the wash cycles can be checked on the display.