Filter
Top Products
GB
7
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash
.
The washing machine will automatically prevent you from selecting a temperature which is higher than the
maximum value set for each wash cycle.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in
conjunction with the selected wash cycle.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of
lightly soiled cotton and synthetic fabrics (refer to the
"Table of wash cycles"
). enables you to wash in less
time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load
quantity.
This function may not be used in conjunction with wash cycles 1, 2, 7, 8, 9, 10, 11, 12, 13, , , .
Stain removal
Bleaching cycle designed to remove the toughest stains. Please remember to pour the bleach into extra
compartment 4 (see Bleach cycle).
This function may not be used in conjunction with wash cycles 1, 7, 8, 9, 10, 11, 12, 13, , .
No spin
The washing machine will not carry out the spin cycle, but rather a drum spin at medium speed to assist water
draining. Recommended when washing garments which are difficult to iron.
This function may not be used in conjunction with wash cycles 8, .
Delay timer
This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time
the button is pressed, the function will be disabled.
N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching
the set programme.
This option is enabled with all programmes.
Personalisation