Filter
Top Products
Installation
Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance and
Care Troubleshooting Service
GB
5
Choosing a programme
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type (see
Laundry).
3. Open the door and make sure the filter is clean
and in place (see Maintenance).
4. Load the machine and make sure items are not
in the way of the door seal. Close the door.
5. Choose the drying time by checking the Drying
Guide table for the type of fabric you are drying
(see Laundry).
- Set the temperature with the HEAT button.
- Select a drying time by rotating the TIMER knob
clockwise, slightly past the time that you want to
select and counter-clockwise, until the indicator
is pointing to the drying time you want.
6. Press the START button to begin.
During the drying programme, you can check on
your laundry and take out items that are dry
while others continue drying. When you close
the door again, press the START button in order
to resume drying.
7. About 10 minutes before the programme is
completed, it enters the final COOL TUMBLE
phase (fabrics are cooled), which should always
be allowed to complete.
8. Open the door, take the laundry out, clean the
filter and replace it (see Maintenance).
9. Unplug the dryer.
Start and Programmes