Filter
Top Products
9
The Controls
Programme Control
Start Switch
Alarm Switch
Active / Empty Water Light
To set the programme, all you have to do is turn the Programme
Control knob until the required selection appears in line with the
indicator.
Automatic programmes (for load sizes more than 1kg)
1. Dry Cottons ( HIGH heat) This gives driest results.
Some bulky items or large load of towels
may appear slightly damp after this
programme and require a short period of
timed drying.
2. Damp Cottons ( HIGH heat)
3. Iron Dry Cottons ( HIGH heat)
This gives the wettest results.
4. Dry Synthetics ( LOW heat)
5. Damp Synthetics ( LOW heat)
6. Iron Dry Synthetics ( LOW heat)
Timed programmes (for load sizes less than 1kg)
7. 40 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
8. 30 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
9. 20 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
10. Airing, 20 minutes of cool tumble.
11. Easy Iron Programme, see section"Easy Iron Programme".
For description of other programmes see next page.
Press and release the START button to commence a drying
programme (The drying programme must have been selected first).
The Active Light will then glow.
The alarm option is selected with the switch in the OUT position, if
you do not need this option press the switch to the IN position.
The alarm (if selected) will sound at the end of the programme or
intermittently during the Crease Care phase.
Setting the
Programme
Programme
Options
Starting the Dryer
Alarm Switch
NOTE: If the door is opened during a programme, the Dryer will
automatically stop. To continue the programme, after closing the
door, the START button must be pressed.