Hotpoint WMUD 942 Washer User Manual


 
GB
9
Wash cycles and functions
Wash functions
Time Saver
If you select this option, the wash cycle duration will be redu-
ced by up to 50%, depending on the selected cycle, thereby
guaranteeing simultaneous water and energy saving. Use this
cycle for lightly soiled garments.
! It cannot be used with the ,Fast Wash 60’”, , , .
Reduced Creases
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform slow
rotations of the drum; the “Reduced Creases” and START/
PAUSE indicator lights will flash (orange) and the text “END
OF CYCLE” will appear on the display. To end the cycle, press
the START/PAUSE button or the “Reduced Creases” button.
! It cannot be used with the , “Fast Wash 30’”, , ,
“Spin” and “Pump out”.
Table of wash cycles
Eco Wash
The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to
the environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.
! It cannot be used with the , , , , .
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load
(kg)
Residual dam-
pness %
Energy con-
sumption kWh
Total water lt
Cycle duration
Wash
Fabric
softener
CLEAN Plus
Anti Stain
40° 1400
5 - - - 180’
Cottons (1st press of the button): extremely soiled whites and resistant colours. 90° 1400
9 53 2,54 85 180’
Cottons (1) (2nd press of the button): heavily soiled whites and delicate colours. 60° 1400
9 53 1,56 76 185’
Cottons (1-2) (3rd press of the button): lightly soiled whites and delicate colours. 40° 1400
9 53 1,09 92 180’
Synthetics (1st press of the button): heavily soiled resistant colours. 60° 800
4 46 1,03 60 110’
Synthetics (4) (1st press of the button): heavily soiled resistant colours. 40° 800
4 46 0,56 60 95’
Synthetics (2nd press of the button): lightly soiled resistant colours. 40° 800
4 - - - 70’
SPECIALS
Fast Wash 60' (1st press of the button): to refresh normal soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
60° 1400
3.5 53 0,84 44 60’
Fast Wash 30' (2nd press of the button): to refresh lightly soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
30° 800
3.5 71 0,20 38 30’
M
My Cycle: allows for any wash cycle to be stored.
Bed&Bath (3): washes bathroom laundry and bedlinen. 60° 1400
9 - - - 140’
EXTRAS
Wool: for wool, cashmere, etc. 40° 800
2 - - - 90’
Delicates
30° 0
1 - - - 80’
Spin (1st press of the button) - 1400 - - 9 - - - 16’
Rinse (2nd press of the button) - 1400 -
9 - - - 36’
Pump out (3rd press of the button) - 0 - - 9 - - - 2’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can
vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any
wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 60°C (2nd press of the button); set wash cycle 40°C (3rd press of
the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value.
2) Long wash cycle for cottons: set wash cycle 40°C (3rd press of the button).
3) Short wash cycle for cottons: set wash cycle
;
temperature of 40°C (press TEMPERATURE button).
4) Long wash cycle for synthetics: set wash cycle 60°C (1st press of the button); temperature of 40°C (press TEMPERATURE button).