Hotpoint WMT03 Washer/Dryer User Manual


 
WARNINGS:
Do not try to
open the
door while
the ‘DOOR
LOCKED’
indicator light
is on.
Programme End Indicator Light
OFF position
Door Locked Indicator Light
Wash programmes
PROGRAMMES
AND OPTIONS
16
The Programme End Indicator light
As soon as the programme selector dial is turned to the
required programme the ‘PROG. END’ indicator light will
illuminate to show the machine has power.
When the selected programme has started the ‘PROG. END
indicator light will go out.
The ‘PROG. END’ indicator light will flash if the machine has
been paused. Press and release the ‘START/HOLD TO RESET
button to continue the programme or press and hold the
START/HOLD TO RESET’ button to cancel.
After the selected programme has finished the ‘PROG. END
indicator light will illuminate and will remain lit until you
return the programme selector dial to its ‘OFF’ position or
start another programme.
Door Locked Indicator light
The ‘DOOR LOCKED‘ indicator light will come on a few
seconds after you press the ‘START/HOLD TO RESET’ button
and will stay lit throughout the programme. A short time
after the programme has finished the ‘DOOR LOCKED
indicator light will go out and you can then open the door.
Door not closed
The programme will not start if the door is not closed
properly, the ‘DOOR LOCKED’ indicator light will be flashing
to show this. Please make sure that the door is properly
closed by pushing it until you hear the catch click.
Automatic Features
Auto half load
Auto half load saves you time and money when washing smaller loads.
Water levels are automatically adjusted to cater for the different loads.
Unbalanced load detection
Your machine has an inbuilt feature to prevent it spinning with an
unbalanced load. This will minimise vibration and prolong the life of the
machine.
If a load is not evenly distributed, the machine may not complete its final
spin. If at the end of the programme the load is still wet, you can open
the door, re-distribute the clothes , close the door and spin them by
using a fast or slow spin programme.
1666200014-01 WMT01/02/03 22/11/2001 3:11 pm Page 16