Filter
Top Products
9
GB
Wash cycles and options
Wash options
Timer Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy saving.
Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with wash cycles 1, 2, 7,
8, 9, 10, 11, 12, 13, 14, , .
Table of programmes and wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load
(kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Wash
Fabric
softener
CLEAN Plus
1
Anti Stain
40° 1600
4 - - - 180’
2
Whites
60° 1600
4 - - - 180’
3
Cottons (4): extremely soiled whites.
90° 1600
7 44 2,16 72 160’
4
Cottons (1): heavily soiled whites and resistant colours.
60° 1600
7 44 1,10 58 192’
5
Cottons (2-3): lightly soiled resistant colours.
40° 1600
7 44 0,99 82 183’
6
Synthetics: heavily soiled resistant colours.
60° 800
3 44 0,93 47 110’
6
Synthetics (5): heavily soiled resistant colours.
40° 800
3 44 0,57 46 95’
SPECIALS
7
Anti Allergy
60° 1600
4
- - - 195’
8
Baby
40° 1000
4
- - - 120’
9
Wool: for wool, cashmere, etc.
40° 800
1,5
- - - 70’
10
Delicates
30° 0
1
- - - 80’
11
Fastwash 60’: to refresh normal soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
60° 1600
3.5
- - - 60’
ECO CYCLES
12
Cottons
Cold
Water
1600
3 44 0,17 63 80
13
Synthetics
Cold
Water
800
3
48 0,07 30 60’
14
Fast 30’
Cold
Water
800
3
71 0,04 34 30’
Partials cycles
Rinse - 1600 -
7
- - - 36’
Spin+Pump out - 1600 - -
7
- - - 16’
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 40°C. The actual washing temperature may differ from the indicated value.
3) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
5) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.