Filter
Top Products
11
GB
Wash cycles and options
Wash options
! If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option
will not be activated.
! If the selected option is not compatible with a previously
selected one, the indicator light corresponding to the first
function selected will flash and only the second option
will be activated; the indicator light for the option which
has been activated will be illuminated.
Extra Rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed. It
is particularly useful for sensitive skin.
Table of wash cycles
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Wash
Fabric
softener
CLEAN Plus
1
Anti Stain
40° 1400
5 - - - 180’
2
Whites
60° 1400
5 - - - 180’
3
Cotton Standard 60°C (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1400
9 53 1.36 57.5 195’
4
Cotton Standard 40°C (2): lightly soiled resistant and delicate colours.
40° 1400
9 53 1.09 92 175’
5
Synthetics: heavily soiled resistant colours.
60° 800
4.5 46 1.03 60 115’
5
Synthetics (3): lightly soiled resistant colours.
40° 800
4.5 46 0.56 60 100’
SPECIALS
6
Anti Allergy Plus
60° 1400
5
- - - 195’
7
Baby
40° 1000
5
- - - 145’
8
Bed & Bath: washes bathroom laundry and bedlinen.
60°
1400
9 - - - 140’
9
Fast Wash 60’: to refresh normal soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
60° 1400
3.5
53 0.84 44 60’
10
Fast Wash 30’: to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
30° 800
3
71 0.20 38 30’
EXTRAS
11
Cotton Standard 20°C: lightly soiled resistant and delicate colours.
20° 1400
9 - - - 175’
12
Shirts
40° 600
2
- - -
80’
13
Wool: for wool, cashmere, etc. 40° 800
2
- - - 85’
14
Delicates
30° 0
1
- - - 80’
Partials cycles
Rinse - 1400 -
9
- - - 36’
Spin + Pump out - 1400 - -
9
- - - 10’
Pump out only * - OFF - -
9
- - - 3’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.
Easy Iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform
slow rotations of the drum; the “Easy Iron” and START/
PAUSE indicator lights will flash (orange) and the text “END
OF CYCLE” will appear on the display. To end the cycle,
press the START/PAUSE button or the “Easy Iron” button.
* If you select programme and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.