Hotpoint WMA9 Washer/Dryer User Manual


 
Options
18
Choosing an option button
To choose an option, press the button and you will see a light come on above the
button. Press again to cancel, and the light will go out. You cannot alter the options
once the machine is running.
Rinse hold... use this option to...
Help reduce the creasing of delicate or synthetic fabrics by holding
clothes in the final rinse water.
The ‘Rinse Hold’ option light will flash to indicate that the programme is
holding the clothes in the final rinse water. Complete the final spin by
pressing the ‘Rinse Hold’ button when the light is flashing.
This option is not available with Wool or Spin only programmes.
Energy Save... use this option to...
Save money and time on lightly soiled loads.
This option is not available with Quick Wash, Rinse and Spin or Spin only
programmes.
Super rinse... use this option for...
Large wash loads and items for young children or people with
sensitive skin.
This option increases the water level of the first two rinses.
This is not available with the Cold Wash, Rinse and Spin or Spin only
programmes.
Option Buttons
PROGRAMMES
AND OPTIONS
Automatic Features
Auto half load
Auto half load saves you time and money when washing smaller loads. Water levels are automatically adjusted
to cater for the different loads.
Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load. This will minimise
excessive vibration and prolong the life of the machine.
Before each spin the machine ‘senses’ the load within the drum and if the machine considers the load to be
unbalanced, it will not automatically spin. Instead the machine will try to redistribute the load to achieve
balance by tumbling backwards and forwards. If it is unable to balance the load after the fifth attempt the
machine will abort the spin process and the load will still be wet at the end of the programme.
If this safety feature is encountered you can spin the load after first opening the door, redistributing the load
and reselecting a fast or slow spin programme. In the case of small loads or single items you may try adding
some extra items of a comparable size to help balance the load.