Filter
Top Products
To obtain claimed energy label
wash performance for a 60°C
cotton wash,dispense powder
detergent in a dosing ball,placed
in an upright position in the
centre of the wash load (Fig 5).
To receive a ‘FREE’ dosing ball,
phone: UK 0800 243 131 or
Republic of Ireland:
1800 386 386
Dispensing
Powder
Detergent
To achieve optimum wash
results we recommend that
you use the detergent
manufacturer’s dispensing
cup to dispense no more than
300 ml of powder (Fig 3).
Dispensing
Fabric
Conditioner
Pour fabric conditioner into
compartment (Fig 4).We
recommend that you do not
exceed the maximum level
indicated.
Dispensing Liquid Detergent
Refer to detergent manufacturer’s instructions for dosage and
pour liquid into the compartment (Fig 1).
Note: The ‘Liquid Detergent’Main Wash Indicator features 3
lines which represent the dosage of liquid to be used (Fig 2).
We recommend that you do not exceed the maximum limit of
150ml.
Using a Dosing Ball
Changing the
Main Wash
Indicator
Pull drawer out until it
reaches its stop.
Press down on button to
release drawer latch,
remove drawer.
Lift ‘Powder’ indicator
out of slots,rotate and
reposition for ‘Liquid’
ensuring it is secure.
Re-locate drawer and
push firmly back into
place.
1
2
3
4
Max.– 150ml.
100ml.
50ml.
The Main Wash Indicator has
been fitted, ready to
dispense ‘Powder’
detergent only.
Fig 2
Fig 3
Fig 4
Fig 5
Fig 1
WARNING
●
Do not dispense
detergent tablets from
the dispenser drawer.
Refer to detergent
manufacturer’s
instructions.
15