Hotpoint WF860 Washer User Manual


 
Door Locked Indicator...‘Keyhole’ symbol
The ‘Keyhole’ symbol will illuminate 2 seconds after you have
pressed the ‘START/CANCEL’ button and will remain lit
throughout the wash programme.
The ‘Keyhole’ symbol will be flashing at the end of the
programme to indicate that the door is still locked. When the
symbol goes off you will hear a bleep and the door can then
be opened.
Door not closed
If a flashing ‘Door’ message appears in the display window,
the door has not been closed properly and the programme
will not start. Ensure that the door is closed properly by
pushing it until you hear the catch click.
WARNINGS:
Do not try to
open the
door during
the wash
programme.
Do not allow
children to
play with the
machine or
tamper with
the controls.
If you cancel a
programme
part way
through a
wash or there
is a power
cut, take care
when
opening the
door. The
machine may
contain hot
water.
This machine
has a Child
Lock feature,
which when
activated
disables all
controls (see
‘Options’).
Progress indicators
Wash programmes
PROGRAMMES
AND OPTIONS
15
On-Off / Selecting a wash programme
Switch the machine ‘On’ by pressing the ‘ON/OFF Pause
button.
To begin the selected programme press ‘START/CANCEL’. I n
order to switch the machine off at the end of the wash
programme press the ‘ON/OFF Pause’ button.
To change a programme
Press the ‘START/CANCEL’ button once.The machine will
bleep and enter a 2 minute pump out programme.
‘0:02’ will be displayed in the window. Pressing the
START/CANCEL’ button again will cancel the programme
totally and ‘On’ will appear in the display window. A different
programme can now be selected by pressing the required
programme button. You might need to add detergent and
fabric conditioner. Press the ‘START/CANCEL’ button to begin
the new programme.
The progress status lights
This set of lights indicate what stage in the wash cycle
the selected programme has reached.
Each light will appear in sequence as each stage of the
programme is reached.
‘START/CANCEL’button
‘ON/OFF Pause’ button
Programme selection buttons