Hotpoint WF840 Washer User Manual


 
Options
19
Choosing an option button
The features listed below are all available with any wash programme selected.
Stored Programme
This option allows you to store your favourite programme for when you
next want to use it. Only one programme can be stored in this function.
T
o store a programme: Load your machine and add detergents. Select your
desired programme and any options you require. Press the ‘START/CANCEL
button, the programme will start. Press the ‘STORED’ button twice and the
programme will be stored for future use. Saving favourite’ in the display
window will remain steady in the display for 2 seconds after it has been saved.
T
o retrieve and use a stored programme: Press the ‘STORED’ button, your
favourite programme will appear on the display. Press the ‘START/CANCEL
button to start the programme.
T
o change a stored programme: Load your machine and add detergents.
Press the ‘STORED’ button, your favourite programme will appear on the
display. Select the programme and options to suit your new requirements.
Press the ‘START/CANCEL’ button and the programme will start. Press the
STORED’ button again and the programme will be changed to your new
settings.‘Saving favourite’ in the display window will remain steady in the
display for 2 seconds after it has been saved.
Child Lock
When activated all the buttons will be disabled and a child will not be
able to alter any wash programme or option settings. Once selected
this feature remains activated, even when the machine is ‘off’.
To use this feature press the ‘Child Lock’ button. The child lock icon will light
and the feature is activated. If any of the control buttons are pressed, the
child lock icon will flash and the machine will bleep 3 times: no alterations to
the control settings will be allowed. If power is interrupted, at any time,
pressing any button will reactivate the child lock feature.
To deactivate this feature hold the ‘Child Lock’ button down for 2
seconds. You will then hear a bleep and the child lock icon will go out.
Time Delay
This feature allows you to delay the start of any wash programme
selected. The programme start can be delayed for a maximum of 24
hours.
To use this feature select the wash programme and any options you require
and then press the ‘Time Delay’ button once. The display window will
indicate ‘1hr’. Repeated pressing of the ‘Time Delay’ button will increase the
delayed start time in 1 hour increments up to 24 hours maximum and will
scroll back to ‘Off’. Once you have selected the appropriate time delay
press the ‘START/CANCEL’ button. The display window will show the set time
delay. The words ‘Time Delay’ will continually flash in the display window and
the time will count down in hours until the end of the Time Delay. Then the
‘Time to End’ will be displayed and the programme will start.
PROGRAMMES
AND OPTIONS
Child Lock button
Stored button
Time Delay button