Hotpoint WF000 Washer/Dryer User Manual


 
Using your Machine
STEP 5
On-Off / Selecting a programme...
To stop or change a programme...
Progress indicator lights...
Programme listing
Door Locked indicator light Progress indicator lights
‘Start/Cancel’
button
Programme selector dial
Variable Spin Speed dial
Variable Temperature dial
Option buttons
‘On/Off’button
The machine is switched on by pressing the ‘On/Off’ button for 2 seconds. All the indicator lights will light up for a few seconds and
the ‘Door Locked’indicator light will flash once.
Turn the programme selector dial to the desired programme. Load the laundry and detergent. Select the options you require.
Press the ‘Start/Cancel’button for 2 seconds to start the programme.
Press the ‘Start/Cancel’button for 2 seconds.
Select ‘Pump Out’ on the programme selector dial.
When the machine has finished emptying,turn the programme selector dial to the new programme (you may need to add
detergent). Press the ‘Start/Cancel’button to start the programme.
If you cancel a hot wash programme, take care when removing the laundry, it might still be very hot.
These will light up when you choose a programme, to indicate
the progress of the selected programme. When started, the
first light in the cycle will stay lit and as the programme
progresses,successive lights will come on until the
programme finishes.
Door Locked indicator light...
The ‘Door Locked’ indicator light will come on two
seconds after you press the ‘Start/Cancel’button and will
stay lit throughout the programme. A short time after the
programme has finished the indicator light will go out and
you can then open the door.
Selected programmes will not start if the door is not closed
properly, the ‘Door Locked’indicator light will flash to show
this. Push the door shut until you hear the catch click.
WARNINGS:
In the unlikely
event of something
not working,see
‘Troubleshooting’
STEP 8.