Filter
Top Products
GB
11
Wash cycles and functions
Table of wash cycles
Wash
cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max.
load
(kg)
Cycle
duration
Wash
Fabric
softener
CLEAN Plus
Anti Stain
40° 1400
5
Cottons (1st press of the button): extremely soiled whites and resistant colours. 90° 1400
9
Cottons (1) (2nd press of the button): heavily soiled whites and delicate colours. 60° 1400
9
Cottons (2) (3rd press of the button): lightly soiled whites and delicate colours. 40° 1400
9
Synthetics (1st press of the button): heavily soiled resistant colours. 60° 800
4
Synthetics (3) (1st press of the button): heavily soiled resistant colours. 40° 800
4
Synthetics (2nd press of the button): lightly soiled resistant colours. 40° 800
4
SPECIALS
Delicates
30° 0
1
M
My Cycle: allows for any wash cycle to be stored.
Wool: for wool, cashmere, etc. 40° 800
2
EXTRAS
Fast Wash 30' (1st press of the button): to refresh lightly soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
30° 800
3.5
Ready to Wear 45’ (2nd press of the button)
30° 1400
1
Drying (Cottons) (1st press of the button)
- -
- - 6
Drying (Synthetics) (2nd press of the button)
- -
- - 4
Drying (Wool) (3rd press of the button)
- -
- - 2
Partials cycles
Spin (1st press of the button) - 1400
- - 9
Rinse (2nd press of the button) - 1400
-
9
Pump out (3rd press of the button) - 0 - - - 9
The duration of the wash cycles can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can
vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any
wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 60°C (2nd press of the button).
2) Long wash cycle for cottons: set wash cycle 40°C (3rd press of the button).
3) Long wash cycle for synthetics: set wash cycle 60°C (1st press of the button); temperature of 40°C (press TEMPERATURE button).
Wash functions
Timer Saver
If you select this option, the wash cycle duration will be redu-
ced by up to 50%, depending on the selected cycle, thereby
guaranteeing simultaneous water and energy saving. Use this
cycle for lightly soiled garments.
! It cannot be used with the , , , “Ready to Wear 45’”,
, .
Slow Spin
Press this button to reduce the spin speed.
! It cannot be used with the ,“Ready to Wear 45’”,
and “Pump out”.
Eco
The Eco function saves energy by not heating the water
used to wash your laundry – an advantage both to the en-
vironment and to your energy bill. Instead, intensified wash
action and water optimisation ensure great wash results in
the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.
! It cannot be used with the , , , “Ready to Wear
45’”, “Drying Synthetics”, “Drying Wool”, .
By selecting the drying function as well, an automatic
drying cycle automatically activates at the end of the wash
cycle – it too allows for saving energy, thanks to the opti-
mal combination of air temperature and cycle duration; the
display will visualise the “Eco” dryness level,
! It can be activated with “ ” programmes.