Filter
Top Products
9
GB
Wash cycles and options
Wash options
Eco
The Eco option saves energy by not heating the water
used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent
! It cannot be used in conjunction with wash cycles 1, 2, 7,
8, 9, 11, 13, 14, , .
By selecting the drying function as well, an automatic
drying cycle automatically activates at the end of the wash
cycle – it too allows for saving energy, thanks to the optimal
combination of air temperature and cycle duration.
! It can be activated with programmes 4 and 5.
Table of programmes and wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary
according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options
selected.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max.
load
(kg)
Cycle
duration
Wash
Fabric
softener
CLEAN Plus
1
Anti Stain
40° 1400
5
2
Whites
60° 1400
5
3
Cottons: extremely soiled whites. 90° 1400
9
4
Cottons (1): heavily soiled whites and resistant colours. 60° 1400
9
5
Cottons (2): lightly soiled resistant colours. 40° 1400
9
6
Synthetics: heavily soiled resistant colours. 60° 800
4
6
Synthetics (3): heavily soiled resistant colours. 40° 800
4
SPECIALS
7
Anti Allergy
60° 1400
5
8
Wool: for wool, cashmere, etc. 40° 800
2
9
Delicates
30° 0
1
10
Fastwash 30’: to refresh lightly soiled garments quickly (not suitable for wool,
silk and clothes which require washing by hand).
30° 800
3,5
11
Ready to Wear
30° 1400
1
DRYING
12
Drying Cottons
- -
- - 6
13
Drying Synthetics
- -
- - 4
14
Drying Wool
- -
- - 2
Partials cycles
Rinse - 1400
-
9
Spin+Pump out - 1400
- -
9
The duration of the wash cycles can be checked on the display.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 4 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.
Delay Timer
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text “OFF”
appears on the display.
! This option can be used in conjunction with all cycles.