Hotpoint WDF 740 A Washer/Dryer User Manual


 
8
GB
Wash cycles
Table of wash cycles
(*) Ready to Wear
This cycle was designed to wash and dry lightly soiled small loads quickly. By selecting this cycle it is possible to
wash and dry a maximum load of 1 kg in just 60 minutes.
!
Please note, this is an automatically programmed wash and dry cycle, therefore it is not possible to manually
set a drying time or drying level in conjunction with this cycle.
!
Please note, the Drying indicator illuminates only during the drying phase of the cycle, not when the cycle is
first selected.
Anti-crease
This function interrupts the wash programme, and the washing is left to soak in water before the appliance is drained.
It is automatically activated with programme 10 (Silk) and helps to prevent the formation of creases.
To complete the cycle press the START/PAUSE button.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents Max. load (kg)
Cycle
duration
Wash
Fabric
softener
Normal
Mini
load
Essentials cycles
1
Cottons: extremely soiled whites.
90° 1400
7 3
1
Cottons (1): heavily soiled whites.
60° 1400
7 3
1
Cottons (2): lightly soiled whites and delicate colours. 40° 1400
7 3
2
Cottons: heavily soiled whites and resistant colours.
60° 1400
7 3
3
Coloureds Cottons (3): lightly soiled and delicate colours.
40° 1400
7 3
4
Synthetics: heavily soiled resistant colours.
50° 800
3 1.5
5
Fastwash 60': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
60° 1400
3 -
Special cycles
6
Baby cycle: heavily soiled delicate colours.
40° 800
2 1
7
Shirts
40° 600
2 1
8
Ready to wear (*)
30° 800
1 -
9
Wool: for wool, cashmere, etc.
40° 800
1.5 1
10
Silk: for garments in silk and viscose, lingerie.
30° 0 -
1 1
Drying cycles
11
Cottons
- -
- - 5 -
12
Synthetics
- -
- - 3 -
13
Wool
- -
- - 1.5 -
Partials wash cycles
A
Rinse Fast
- 1400
-
7 3
B
Spin Fast
- 1400
- - 7 -
C
Pump out
- 0 - - - 7 -
The duration of the wash cycles can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration
can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing
and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 1 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.