Hotpoint WD865 Washer/Dryer User Manual


 
Sort your laundry into groups with the same wash and dry
care labels. Load the machine, making sure that clothes
are not trapped in the door. Close the washing machine
door by pushing it until it clicks.
Press ‘START/CANCEL’ to begin
the programme.
During the programme, status
lights will glow to indicate at what
stage in the cycle the programme
has reached.
The ‘Time to End’ displayed will
count down the programme time
to the end of the programme.
3
1
4
5
2
7
WARNINGS:
Do not allow
children to
play with the
machine or
tamper with
the controls.
This machine
has a Child
Lock feature,
which when
activated
disables all
controls (see
‘Options’).
Do not
overload the
machine! It
may damage
laundry and
reduce the
quality of
the wash.
Do not try to
open the door
when a
programme is
running.
Do not open
the dispenser
drawer
during any
programme.
In the unlikely
event of
something not
working see
the Trouble-
shooting
section.
At the end of the programme ‘End’ will illuminate in the
display window. Also a ‘Keyhole’ will glow indicating the
door is locked. The machine will bleep and the light will go
out when the door can be opened.
8
9
A typical wash & dry programme
12
Select the programme you require.
You will hear a bleep and the
programme temperature will
illuminate in the display window
followed by the spin speed. After 4
seconds the programme length,
‘Time to End’, will be displayed.
Select any optional wash feature(s)
that you may require by pressing
the appropriate button(s),
indicator lights will show what you
have chosen.
Switch the machine off by pressing
the ‘ON/OFF Pause’ button.
We also recommend that you
switch off the electricity and water
supply.
Add detergent and fabric conditioner, if required, to the
dispenser drawer. Refer to the detergent manufacturer’s
dosage instructions.
Switch the machine on by pressing
ON/OFF Pause’.
‘On’ will illuminate in the display
window.
A TYPICAL WASH &
DRY PROGRAMME
6
Press either the timed dry or sensor
dry button until you see the setting
you require in the display.