Filter
Top Products
5
Important
Information
Installation Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance
and Care
Service
Troubleshooting
GB
Dryer Description
Control panel
The front The back
HEAT
Button
TIMER/PROGRAMME
Knob
DELAY
Knob
(TVM572 only)
START
Button
Indicator
ALARM
Button
(TVM572 only)
ACTIVE
Light
(TVM572 only)
The ACTIVE indicator light (TVM572 only) signals that
your dryer is in use. This light will glow when the START
button is pressed. It will remain on until the door is
opened or the power is turned off. This light will be on
during a delayed start programme.
The Delay knob (Delay Timer) sets a delay on the dryer’s
start time (TVM572 only). Rotate it fully clockwise and
then back until you reach the number of hours you want
to delay the start time (see Start and Programmes).
The TIMER/PROGRAMMES knob sets the drying time or
programme: rotate it clockwise never counter-clockwise
until the indicator is pointing to the time or programme
you want to select (see Start and Programmes).
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: LOW heat
IN: HIGH heat
The ALARM buzzer (TVM572 only) signals the end of a
drying cycle.
OUT: Buzzer OFF
IN: Buzzer ON
Air Intake Vent
Vent Tube fitted here
Caution: Hot!
Rating plate
Control Panel
Drum
Model & Serial
numbers
Filter