Hotpoint TVM560 Clothes Dryer User Manual


 
5
Important
Information
Installation Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance
and Care
Service
Troubleshooting
GB
Dryer Description
The Drying Guide allows you to consult a user friendly
table of fabric types and load capacities.
Model TVM562 also has an available Programmes
Guide.
(TVM562 only) The DELAY knob (Delay Timer) sets a
delay on the dryer’s start time. Rotate it clockwise until
you reach the number of hours you want to delay the
start time. If you go too far, turn the knob back counter
-clockwise (see Start and Programmes).
The TIMER/PROGRAMMES knob sets the drying time
or programme: rotate it clockwise, never counter-
clockwise until the indicator is pointing to the time or
programme you want to select (see Start and
Programmes).
The Start button/light starts a selected programme
(see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: Low Heat
IN: High Heat
(TVM562 only) The ALARM buzzer signals at the end
of a drying cycle (see Start and Programmes).
OUT: Alarm OFF
IN: Alarm ON
(TVM562 only) The ACTIVE indicator light signals that
your dryer is in use. This light will glow when the Start
button is pressed. It will remain on until the door is
opened or the power is turned off. This light will be on
during a delayed start programme.
Control panel
ACTIVE Light
(TVM562 only)
Drying Guide
Programmes Guide
(TVM562 only)
START
Button
HEAT
Button
Indicator
Model
number
(TVM560 or
TVM562)
ALARM Button
(TVM562 only)
TIMER/PROGRAMMES
Knob
DELAY knob
(TVM562 only)
The front The back
Air Intake Vent
Vent Tube fitted here
Caution: Hot!
Rating plate
Control Panel
Drum
Model & Serial
numbers
Filter