Filter
Top Products
10
How to use your dryer
1. Plug in, switch on
electricity.
2. Sort your laundry
(see section “Sorting
Your Laundry”)
3. Open the door.
Check that the fluff
filter is clean (see
section “How to
remove and clean the
fluff filter”).
4. Load the dryer,
placing the clothes
carefully in the drum
pushing them well
towards the back and
away from the door
seal. Close the door.
5. Select the
relevant heat setting
(see section “The
Controls”).
6. Select Fresh Air
option, if required (see
section “The
Controls”).
8. When finished
open the door and
take out the laundry.
Clean and replace the
fluff filter.
7. Select the required
programme/drying
time (See section “The
Controls”).
The dryer will start.
WARNING: WHEN
SWITCHING
ELECTRICITY ON OR
OFF, PLEASE
ENSURE THAT YOUR
HANDS ARE DRY.
WARNING: WHEN
SWITCHING
ELECTRICITY ON OR
OFF, PLEASE
ENSURE THAT YOUR
HANDS ARE DRY.
Button IN
HIGH HEAT
Button OUT
LOW HEAT
Button OUT
FRESH AIR OFF
Button IN
FRESH AIR ON
WARNING: CHILDREN HAVE BEEN KNOWN TO CLIMB INTO TUMBLE DRYERS AND INJURE
THEMSELVES. ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF AT THE MAINS WHEN
THE DRYER IS NOT BEING USED.
9. Switch off
electricity and
remove plug from
socket.
Door Release
To open the door, grip the handle and pull
towards you. If the door is opened while the
Dryer is in use, the drying programme cuts out
automatically and the machine stops. When the
door is closed the Dryer will restart but you will
not need to reset the Timer Control. You can
however reset the Timer Control at any stage,
should you wish.