Filter
Top Products
Problem Possible Causes
Wkstto Do
No fabric sof-temerw_ used
Synthefia, permanent
and blends am canse static
• Try a fabric softener.
• Adjust controls for less dl_/ing.
• Try a fabric softener•
• Try a fabric softener.
loads of heavy items
(llke beachtoweb)
_trob n_rOl_rly set
Lint filt_ is full
Improper or ol_lruct_l
Blown fuses or tril3_!
drcnit breakers
O_rloac_3g/
_mb'mlng loads
Underloadin[
• Separate heavy items fTom light weight items
(generally, a well-sorted washer load is a
well-sorted dryer load)•
sLarge, heavy loads contain more moisture
and take longer to dry. Separate large, heavy
items into smaller loads to speed drying time.
• Match control settings to the load you
aredryin[[.
• Clean lint filter before every load.
• Check instigation instructions for proper
ducting/venting.
• Make sure ducting is clean, free of kinks
and unobstructed.
• Check to see if outside wall damper
operates easily.
• See the Venting the Dryer section.
• Replace fuses or reset circuit breakers. Since
most dryers use 2 fuses/breakers, make sure
both are operating•
• Do not put more than one-her load in
the dryer at a time.
• If You are drying only one or two items,
add a few items to ensure proper tumbling•
16