Hotpoint NVLR333GT Clothes Dryer User Manual


 
3
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
This dryer must be properly installed and located in
accordance with the Installation Instructions before it is
used. If you did not receive an Installation Instructions
sheet, you can receive one by calling us toll-free at the
GE Answer Center
®
, 800.626.2000.
PROPER INSTALLATION
Properly ground dryer to
conform with all governing
codes and ordinances. Follow
details in Installation
Instructions.
Install or store where it
will not be exposed to
temperatures below freezing
or exposed to the weather.
Connect to a properly rated,
protected and sized power
supply circuit to avoid
electrical overload.
Remove all sharp packing
items and dispose of all
shipping materials properly.
Exhaust/Ducting:
Gas dryers
MUST
be
exhausted to the outside.
Exhausting electric dryers
to the outside is
strongly
recommended
to prevent
large amounts of moisture
and lint from being blown
into the room.
Use only rigid metal or
flexible metal 4
diameter
ductwork inside the dryer
cabinet or for exhausting to
the outside.
USE OF PLASTIC
OR OTHER COMBUSTIBLE
DUCTWORK CAN CAUSE A
FIRE. PUNCTURED
DUCTWORK CAN CAUSE A
FIRE IF IT COLLAPSES OR
BECOMES OTHERWISE
RESTRICTED IN USE OR
DURING INSTALLATION.
For complete details, follow the
Installation Instructions.
3
2
1