Hotpoint CTD40 Clothes Dryer User Manual


 
Installation
Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance and
Care Troubleshooting Service
GB
5
Programmes
Programme
What it does... How to set it...
Note:
Easy
Iron
Brief programme (approximately
10 minutes) that softens fibres of
clothing that is ready for ironing.
! This is not a drying
programme (see previous
page).
Options available:
Alarm
1. Position the PROGRAMMES knob
on .
2. Select any options if required.
3. Press the START button.
Options available:
Alarm
1. Position the PROGRAMMES knob
on .
2. Select any options if required.
3. Press the START button.
Options available:
Alarm, Delayed Start,
Pre-Creasecare,
Post Creasecare.
1. Position the PROGRAMMES knob
on .
2. Select any options if required.
3. Press the START button.
Options available:
Alarm, Delayed Start,
Pre-Creasecare,
Post Creasecare.
1. Position the PROGRAMMES knob
on .
2. Select any options if required.
3. Press the START button.
Options available:
Alarm, High Heat, Delayed
Start, Pre-Creasecare,
Post Creasecare.
Consult ‘suggested drying
times’ (see Laundry).
The last 10 minutes of these
programmes is the Cool
Tumble phase, see below.
1. Position the PROGRAMMES knob
on the desired time: 160, 140, 120,
100, 80, 70, 60, 50, 40, 30 or 20.
2. Select any options if required.
3. Press the START button.
Cottons
Cupboard
dry
Dries your clothes on High Heat
setting, ready for putting away.
Timed Drying
(160, 140, 120,
100, 80, 70, 60,
50, 40, 30 or 20
minutes)
Dries wet clothing on Low Heat
or small loads (less than 1kg).
Can be used with High Heat
option if you prefer to use a
timed programme.
Brief programme (approximately
10 minutes) that cools fibres of
clothing.
Synthetics
Cupboard
dry
Cool Tumble
Dries your clothes on Low Heat
setting, ready for putting away.
Start and Programmes
! If the On/Off light is not lit; Press the ON/OFF button and then select programme.