Filter
Top Products
Drying Guide
TIMER
Knob
START
Button
Indicator
Empty Water
Light
The Empty Water indicator light signals that the
water container is full and must be emptied. The light
will take a few seconds to go out after replacing the
empty water container, the dryer must be running for
this to happen.
Note: If the water container fills, this light illuminates,
the heat is turned off and your laundry will not dry.
The TIMER knob sets a drying time.
Rotate it clockwise, never counter-clockwise, until
the indicator is pointing to the drying time you want
to select (see Start and Programmes).
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: HIGH heat. IN: LOW heat.
The
Drying Guide
allows you to consult a user
friendly table of fabric types and load capacities.
HEAT
Button
Dryer Description
6
GB
Control panel
To open the door The features
Water container
Air intake
grille
Rating plate
Filter
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover
Press and release the front
panel in position shoiwn
Condenser Unit
(cover open)