Hotpoint AQXGD 169 PM Washer User Manual


 
GB
7
Control panel
DELAYED
START
button
DISPLAY
TEMPERATURE
button
START/PAUSE
button
with indicator light
WASH
CYCLE
PHASE
icons
SPIN SPEED
button
DOOR
LOCKED
indicator light
CHILD LOCK
button and indicator
light
ECO
indicator
light
OPTION
buttons
ON-OFF/CANCEL
button with indicator light
PROGRAMME
knob
and MEMORY
buttons
INFO
button
ON-OFF/CANCELbutton with indicator light :
press the button briefly to switch the machine on or
off. The green indicator light shows that the machine
is switched on. To switch the washing machine off
during a wash cycle, press and hold the button for
approximately 2 seconds; pressing the button quickly
or accidentally will not switch the machine off.
If the machine is switched off during a wash cycle,
the programme will be cancelled.
PROGRAMME knob: this can be rotated in both
directions. To set a more suitable programme, please
refer to the Table of Programmes.
The knob is locked into position during the wash cycle.
MEMORY buttons: press and hold one of the buttons
to store a cycle with your own set preferences in the
memory of the machine. To recall a previously-stored
cycle, press the corresponding button.
TEMPERATURE
button: press to decrease the
temperature: the value will be shown on the display.
SPIN CYCLE
button: press to reduce the r.p.m.
value or to exclude the spin cycle completely: the
value will be shown on the display.
DELAYED START
button: press to set a delayed
start time for the selected programme. The delay
time will be shown on the display.
OPTION buttons: the name of the option will be shown
on the display when the corresponding button is
pressed. When the relevant indicator light illuminates,
this shows that the option has been selected.
INFO button: press the button to display information
relating to the selected wash cycle and options.
WASH CYCLE PHASE icons: these light up to
provide an indication of the progress of the wash
cycle (Wash
- Rinse - Spin - Pump out ).
The text
lights up when the cycle has finished.
START/PAUSE button with indicator light: when the
green indicator light flashes slowly, press the button to
start the wash cycle. When the cycle has started, the
indicator light is illuminated in a fixed manner. To pause
the wash cycle, press the button again; the indicator light
will turn orange and begin to flash again. If the Door
Locked
indicator light is off, the porthole door may
be opened. To restart the wash cycle from the point at
which it was interrupted, press the button again.
DOOR LOCKED
indicator light: this indicates
that the porthole door is locked. To open the door,
pause the wash cycle (see following page).
CHILD LOCK
button and indicator light: this is
used to enable or disable the Child lock function, by
pressing the button for approximately 2 seconds. When
the indicator light is illuminated, the control panel is
locked. This avoids accidental changes being made to
the wash cycles, especially where children are at home.
ECO indicator light: the
icon lights up when the
electricity saving reaches at least 10% (this can be
achieved by adjusting the wash cycle settings).
When the machine is first switched on, you will be
asked to CHOOSE A LANGUAGE (Select Language
appears on the display): press the INFO button
repeatedly until the required language appears on the
display. After 5 seconds the language selection will be
stored in the memory of the machine. If the wrong
language is selected by mistake, press and hold the
INFO and DELAYED START buttons simultaneously; this
will return the language selection menu to the display.