Filter
Top Products
EN
9
! If the selected option is not compatible with another
option that has been selected previously, the indicator
light corresponding to the first option selected will
flash and only the second option will be activated; the
indicator light corresponding to the button will remain lit
in a constant manner.
7. START THE PROGRAMME. Press the START/PAUSE
button. The corresponding indicator light remains lit in
a fixed manner and the porthole door locks (the
DOOR LOCKED indicator light illuminates). The icons
corresponding to the wash cycle phases will light up
during the cycle to indicate which phase is currently in
progress. To change a wash cycle once it has already
started, pause the washer dryer by pressing the START/
PAUSE button; then select the desired cycle and press
the START/PAUSE button again. To open the door
during a wash cycle, press the START/PAUSE button;
if the DOOR LOCKED indicator light is switched off
you may open the door. Press the START/PAUSE button
again to restart the wash cycle from the point at which it
was interrupted.
8. THE END OF THE WASH CYCLE. This is indicated
by the illuminated text END. The porthole door may be
opened immediately. If the START/PAUSE indicator light
is flashing, press the button to end the cycle. Open the
door, unload the laundry and switch off the machine.
! If you wish to cancel a cycle which has already begun,
press and hold the button until the cycle stops and the
machine switches off.