Hotpoint AQGMD149 Washer/Dryer User Manual


 
GB
7
Control panel
DELAY TIMER
button
DISPLAY
TEMPERATURE
button
START/PAUSE
button with indicator
light
WASH
CYCLE
PHASE
icons
SPIN SPEED
button
DOOR
LOCK
indicator light
CHILD LOCK
button and indicator
light
ECO
indicator
light
OPTION
buttons
ON-OFF/CANCEL
button with indicator light
PROGRAMME
knob
and MEMO
buttons
INFO
button
ON-OFF/CANCEL button with indicator light :
press the button briefly to switch the machine on
or off. The green indicator light shows that the
machine is switched on. To switch the washer-dryer
off during a wash cycle, press and hold the button
for approximately 2 seconds; pressing the button
quickly or accidentally will not switch the machine
off.
If the machine is switched off during a wash cycle,
the programme will be cancelled.
PROGRAMME knob: this can be rotated in both
directions. To set a more suitable programme,
please refer to the Table of Programmes.
The knob is locked into position during the wash
cycle.
MEMO buttons: press and hold one of the buttons
to store a cycle with your own set preferences in
the memory of the machine. To recall a previously-
stored cycle, press the corresponding button.
TEMPERATURE
button: press to decrease the
temperature: the value will be shown on the display.
SPIN CYCLE button: press to reduce the r.p.m.
value or to exclude the spin cycle completely: the
value will be shown on the display.
DELAYED START
button: press to set a
delayed start time for the selected programme.
The delay time will be shown on the display.
OPTION buttons: the name of the option will be shown
on the display when the corresponding button is
pressed. When the relevant indicator light illuminates,
this shows that the option has been selected.
INFO button: press the button to display information
relating to the selected wash cycle and options.
WASH CYCLE PHASE icons: these light up to
provide an indication of the progress of the wash
cycle (Wash
- Rinse - Spin - Drying ).
The text
lights up when the cycle has finished.
START/PAUSE button with indicator light: when
the green indicator light flashes slowly, press the
button to start the wash cycle. When the cycle has
started, the indicator light is illuminated in a fixed
manner. To pause the wash cycle, press the button
again; the indicator light will turn orange and begin
to flash again. If the Door Locked
indicator
light is off, the porthole door may be opened. To
restart the wash cycle from the point at which it
was interrupted, press the button again.
DOOR LOCKED
indicator light: this indicates
that the porthole door is locked. To open the door,
pause the wash cycle (see following page).
CHILD LOCK
button and indicator light: this is
used to enable or disable the Child lock function, by
pressing the button for approximately 2 seconds. When
the indicator light is illuminated, the control panel is
locked. This avoids accidental changes being made to
the wash cycles, especially where children are at home.
ECO indicator light: the
icon lights up when the
electricity saving reaches at least 10% (this can be
achieved by adjusting the wash cycle settings).
When the machine is first switched on, you will be asked to
choose a language (Select Language appears on the display):
press the INFO button repeatedly until the required language
appears on the display. After 5 seconds the language
selection will be stored in the memory of the machine. If the
wrong language is selected by mistake, press and hold the
INFO and DELAYED START buttons simultaneously; this will
return the language selection menu to the display.