Hotpoint AQGL129PI Washer/Dryer User Manual


 
/*
7
ON-OFF/CANCELbutton with indicator light :
press the button briefly to switch the machine on or
off. The green indicator light shows that the machine
is switched on. To switch the washing machine off
during a wash cycle, press and hold the button for
approximately 2 seconds; pressing the button quickly
or accidentally will not switch the machine off.
If the machine is switched off during a wash cycle,
the programme will be cancelled.
PROGRAMME knob: this can be rotated in both
directions. To set a more suitable programme, please
refer to the Table of Programmes.
The knob is locked into position during the wash cycle.
TEMPERATURE
button: press this button to
adjust the temperature; the value will be indicated by
the indicator lights above it (see Running a wash cycle).
SPIN SPEED
button: press this button to
adjust the spin value or to exclude this part of the
programme; the value will be indicated by the
indicator lights above it (see Running a wash cycle).
WASH INTENSITY
button: press this button to
adjust the wash intensity; the value will be indicated
by the indicator lights above it (see Running a wash
cycle).
OPTION buttons and indicator lights: may be used
to select any of the available options. The indicator
light corresponding to the selected option will
remain lit (see Running a wash cycle).
WASH CYCLE PHASE icons: these light up to
provide an indication of the progress of the wash
cycle (Wash
- Rinse - Spin - Pumpout ).
The text
lights up when the cycle has finished.
START/PAUSEbutton with indicator light: when
the green indicator light flashes slowly, press the
button to start the wash cycle. When the cycle has
started, the indicator light is illuminated in a fixed
manner. To pause the wash cycle, press the button
again; the indicator light will turn orange and begin
to flash again. If the Door Locked
indicator
light is off, the porthole door may be opened.
To restart the wash cycle from the point at which it
was interrupted, press the button again.
DOOR LOCKED
indicator light: this indicates
that the porthole door is locked. To open the door,
pause the wash cycle (see following page).
CHILD LOCK
button and indicator light: this is
used to enable or disable the Child lock function,
by pressing the button for approximately 2
seconds. When the indicator light is illuminated, the
control panel is locked. This avoids accidental
changes being made to the wash cycles, especially
where children are at home.
ECO indicator light: the
icon lights up when the
electricity saving reaches at least 10% (this can be
achieved by adjusting the wash cycle settings).
TEMPERATURE
button
PROGRAMME
knob
OPTION
buttons and
indicator
lights
DOOR
LOCKED
indicator light
START/PAUSE
button with indicator
light
WASH
CYCLE
PHASE
icons
SPIN SPEED
button
WASH
INTENSITY
button
CHILD LOCK
button and
indicator light
ON-OFF/CANCEL
button with indicator light
ECO
indicator
light
Control panel