Hotpoint AQD1170F 697 E Washer/Dryer User Manual


 
EN
9
Wash cycles and options
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Drying
Detergent and
additives
Max.
load
(kg)
Cycle
duration
Wash
Fabric
softener
Cottons (2): lightly soiled whites and delicate colours. 40° 1600
11
Synthetics
60° 800
5
Synthetics (4) 40° 800
5
Whites
60° 1600
6
Coloureds (3)
40° 1600
6
Darks
30° 800
6
Refresh
- - - - - 2
Wool: for wool, cashmere, etc. 40° 800
2,5
Ultra Delicates
30° 0
1
Rinse
- 1600
-
11
Spin and Pump out - 1600
- - 11
Wash & Dry
30° 1600
1
Dry Cottons - -
- - 7
Dry Wool - -
- - 2,5
Dry Synthetics - -
- - 5
Cottons: extremely soiled whites and resistant colours. 90° 1600
11
Cottons (1): heavily soiled whites and resistant colours. 60° 1600
11
(*) The duration of the wash cycles can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash options
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option “ “.
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
! It cannot be used in conjunction with , , , , ,
, , , , , , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
! It cannot be used in conjunction with , , , , ,
, , .
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level “Iron”.
Eco
The Eco Option saves energy by not heating the water
used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of a
liquid detergent.
! It cannot be used in conjunction with , , , , ,
, , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with , , , , ,
, , , , , .