The Control Panel
Turning the Machine On
Turning the Programme Selector to your chosen programme will turn the machine on.
The Programme Selector must be returned to the OFF position between each wash
cycle in order to reset the controls.
Start Pause Button
START
After selecting the programme and the required options press the Start Pause button
once to start the wash cycle. There will be a short time delay to the start of the
programme while the machine sets the wash parameters for the selected programme
and options. The Door Locked and KG Mode indicator lights will also illuminate a few
seconds after pressing the Start Pause button.
PAUSE
The programme may be paused at any time during the wash cycle by holding down
the Start Pause button for about two seconds. The door locked indicator light will
remain illuminated for approximately 2 minutes. The door can be opened when this
indicator goes out. To restart the programme, press the Start Pause button once again.
Cancelling and Changing the Programme
To cancel the programme the Programme Selector should be rotated to the OFF
position. Select a new programme and start as detailed above.
16
Programme
Selector
Start/Pause
Button
Spin Speed
Selector
Digital
Display
Wash Time
Selector
Door Lock
Indicator
Night &
Day
Sensitive
Care
Delay
Start
Temperature
Selector
Drying
Selection
In some programs in the initial phase of the cycle there are planned spin sequences to
ensure optimal wash results.
Sports
High Dry
Low Dry
Rapid
14’-30’-44’
Wash
&
Dry 59’
Cottons
+
Pre
Coloureds
Synthetics
Delicate
&
All in One
20°
All Baby
All Delicate
&
Night
&
Day
90 60 40
120’ 90’
60’ 30’
30
20