Hoover VHC 680F Clothes Dryer User Manual


 
Important: Always switch off and remove the
plug from the electricity supply before
cleaning the condenser.
To maintain the efficiency of the dryer regularly
check that the condenser is clean.
To remove the
condenser
1. Remove the kickplate (see page 15).
2. Turn the two locking levers anti-clockwise
and pull out the condenser.
3. Pull out the condenser unit.
4. Gently remove any dust or fluff with a
cloth, then wash the unit by holding it
under a running tap turning it so that
water flows between the plates, to
remove any dust or fluff.
5. Refit the condenser ensuring it is in the
correct way (as indicated by the arrow)
and pushed firmly into place. Lock the
two levers by turning them clockwise.
6. Refit the kickplate.
16
Condenser
40005995Eng.qxd 24/07/2009 12:19 Page 16