Hoover DYN D Washer User Manual


 
Automatic Features
KG Mode (Half Load)
Available on the Cottons and Synthetics cycles, the intelligent sensor adjusts the water
level and programme length throughout each phase of the cycle according to how
much laundry you load into the machine. The KG Mode indicator will light up when
the intelligent sensor is weighing the laundry.
The washing machine is fitted with a self-adjusting water level system. This system
enables the machine to use the optimum amount of water needed to wash and rinse
the laundry in relation to the particular load. This results in a reduction of the water
and electricity used without in any way compromising the washing and rinsing
performance. The amount of water and electricity used will always be appropriate for
the clothes load size.
The washing machine automatically ensures excellent washing results at minimum cost
whilst respecting the environment.
Out of Balance protection
This model is fitted with an electronic sensor device that checks if the load is balanced
correctly. If the load is slightly unbalanced the machine will re-balance it automatically
and then carry out the normal spin. If, after several attempts, balance is not restored a
reduced spin speed will be used. If loads are seriously unbalanced the spin stage will
be cancelled. This helps limit vibration, reduce noise and improve the washing
machine's reliability and life.
20
21
Easy Iron
This function is designed to reduce creasing of your clothes during your wash cycle,
and is tailored to specific fabric types. This option is only available on Synthetics,
Delicates, Woolmark and Silk programmes.
Wash Time Selector
Once the programme has been selected the indicator light will automatically show
the wash time set for that programme. Selecting a different wash time the relevant
indicator will light up. For example: Using this button on the Rapid Wash cycle will
enable you to select either a 14, 30 or 44 minute wash cycle.
This selection is only available on the Cotton, Synthetic and Rapid programmes.
Programme
Easy Iron Function
Action Required to Complete the
Cycle
Mixed
& Synth’s
The programme is completed by a
short spin of very low speed.
_
Delicate
The machine stops in the final rinse
stage and the option indicators
blink.
The load is held in the water in the
drum, thus reducing creasing and
enabling easier ironing.
Press the Easy Iron button to
continue with the programme.
The machine will then pump out
the water and the programme
will conclude with a short spin.
Finally, the programme carries
out a brief tumbling action to
loosen the items in the load.
Wool
& Silk
The machine stops in the final rinse
stage and the option indicators
blink. The load is held in the water
in the drum, thus reducing creasing
and enabling easier ironing.
Press the Easy Iron button and
the machine will pump out the
water and complete the cycle
with a short spin cycle.