Filter
Top Products
HFD, HFCF SERIES ELECTRIC FRYER
HOBARTCORP F-32964 Rev. C (May 2012)
-4-
INTRODUCTION
GENERAL
Hobart Fryers are produced with quality workmanship and material. Proper installation,
usage and maintenance will result in years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instruction.
This manual is applicable to model listed on the cover page. Procedures in this manual
will apply to all models unless specified. Pictures and illustrations can be of any model
unless the picture or illustration needs to be model specific.
ORDERING PARTS
Customers may order parts directly from their local authorized service center. If not
known, call Hobart Customer Service 1-888-4HOBART.
To speed up your order, provide the model number, serial number, electrical
specifications, part needed, item part number (if known) and quantity needed.
UNPACKING
This fryer was carefully inspected before leaving the factory. Upon acceptance of the
shipment, the transportation company assumes full responsibility for safe delivery.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Check that the following have been included:
Crumb Rack(s)
Tank Brush
Adjustable (4) Legs. Fryer Batteries with the KleenScreen PLUS® Filtration System
have legs installed from the factory.
Drain Pipe Extension for freestanding fryers only.
Twin Fry Baskets (2) per fry tank
Cleanout Rod (non-filtered fryers only)
Fryer Batteries with the KleenScreen PLUS® Filtration System
Filter Pan
Suction Tube
Screen Assembly
Boil Out ByPass™ Extension
Complimentary Pack of Micro-Filtration Envelopes
High temperature discard hose
Manual and Warranty
Sample Boil Out Tablets
CD with Fryer Menu Editor Software – Computer Models Only