Hitachi BD-W80PAE Washer User Manual


 
8
3WPL079591-2
Control Panel and Display
Water temperature
The
symbol is on when the heater is off (Cold setting).
Spin speed
(No Spin) : Final spin is cancelled and last rinse water is drained
only.
(Rinse Hold) : Final spin is cancelled and water is not drained, so
the laundry remains in the last rinse water.
Symbol is on when the spin speed from 400 to 1200 r/min is
selected.
QUICK option
INTENSIVE option
PREWASH option
EXTRA RINSE option
Child lock option
All buttons are disabled except the POWER button and Jog Dial, and
the door is locked when the
symbol is on.
Door lock
The door is locked when the
symbol is on.
TIMER option
Remaining time of the program (shows ‘TIME LEFT’), remaining time
until timer operation is completed (shows ‘h’), and error codes.
Page 21 : Error Codes
Lets you program a wash to nish up to 24 hours later. The symbol is
shown on the display.
Child lock: To prevent accidental operation by children, this disables the
operation buttons and dial, and also locks the door. Press the TIMER
button for 3 seconds to activate this option. The
symbol is shown on
the display. Press TIMER button for 3 seconds again to cancel the child
lock. (Remaining time of timer operation is shown instantaneously but
disappears after the child lock is set.)
Displays all cycle information, remaining time and error codes.
TIMER button
LED multi function
display